Fiat Ducato / Peugeot Boxer / Citroen Relay Immobilizer unit 01336569080 | Key supply | Delphi – Programming Service

Fiat Ducato | Peugeot Boxer | Citroen Relay Immobilizer unit 01336569080 | Key supply | Delphi – Programming Service

This listing is NOT to supply a replacement immobilizer module – This is a Cloning / Transponder chip supply service!

• The 'Cloning service only' option above is if you have a faulty Immobilizer ECU Unit / Module on your vehicle, for example it may be water damaged or have a blown component and are looking to replace the unit. You may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is 'Locked' to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & will will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. In most cases we can extract the necessary data whether your original unit is completely dead with 'No communication' with a diagnostic scanner. Once the donor unit has been programmed (Cloned) your vehicle will then start & run, the mileage display & the central locking etc will be unaffected & operate as it should.
• The 'Key transponder only' option above is for the supply & programming of 1 transponder chip using the data from your immobilizer to generate the data needed to program the transponder to be fitted into a key blade ready to start your vehicle. This price is for the first transponder to be supplied & programmed, if you require more than 1 transponder to be supplied or if you have also ordered the 'Cloning service' for an immobilizer unit then use the 'Additional transponder' for ordering the additional transponders.
• The 'Additional transponder' option is for the supply & programming of additional transponders only if you have also ordered the  'Cloning service' for an immobilizer unit or have ordered the 'Key transponder only' option

• The ‘Data recovery‘ option above is to repair a corrupt Fiat Ducato Immobiliser module – Fitted to various Fiat Ducato | Citroen Relay | Peugeot Boxer models – It is common for the Immobiliser module to get a software corruption – This regularly happens after a flat battery | jump start or from just replacing or disconnecting+reconnecting the car battery. Common fault symptoms are that the car does not start with the keys not being recognised by the vehicle – A diagnostic scan will usually show ‘Immobiliser problem’. We can reprogram (Recover) your original Immo module correcting the software file – We will also need the engine ECU+the keys for the vehicle as these all need to be re-aligned together+new key transponders supplied. The modules will then plug straight back into your car and keys etc will start the vehicle+work correctly. To get your Immobiliser module repaired  all you have to do is simply send us your Immobiliser module, Engine ECU and Key (As in the picture).