EU Delivery
UK Delivery
VW Audi Seat Skoda EDC17CP54 | ECU Cloning
This listing is NOT to supply an ECU module – This is a Cloning service!
- If you have a faulty ECU (Electronic Control Unit) / Programmed component on your vehicle, for example it may be water damaged or have a blown component and are looking to replace the unit you may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is 'Locked' to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & will will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. Once the donor unit has been programmed (Cloned) your vehicle will then start & run, the mileage display & the central locking etc will be unaffected & operate as it should. *Important* On this particular unit we can only perform this operation if there is 'Communication' with diagnostic tools with your original (Faulty) unit.
EDC17CP54-2.2 Example part numbers:
0281032234 – 0281030330 – 0281031460 – 0281031730 – 0281032248 – 0281032249
| Weight | 2 kg |
|---|---|
| Brand | |
| Car Make | Audi, Seat, Skoda, Volkswagen |
| Country of Manufacture | |
| Fuel Type | Diesel |
| Other Part Number | |
| Type |
Be the first to review “Audi Seat Skoda Volkswagen VW ECU Bosch EDC17 | EDC17CP54 | Programming Service”
1 . Scan the vehicle with a diagnostic scanner & record fault codes – rectify any faults recorded here first & check the wiring for faults
2 – If your ECU has ‘No communication’ with a diagnostic scanner it is essential that you check relevant fuses and consult a wiring diagram for your vehicle and verify the power supply & test the wiring to your ECU – particularly test power supply relays (Engine control relay). – ECU’s returned due to misdiagnosis are subject to a 20% restocking charge
If you are not a qualified / experienced auto electrician or garage technician and you are unsure if the problem with your car is the ECU then please consult one first before ordering – there is a 20% restocking charge for returns due to misdiagnosis
If your fault is a cylinder misfire please check spark plugs / leads / coil / injectors and wiring faults / headgasket faults etc before ordering, if these have been checked or replaced then it is important to check inlet manifolds for leaks, engine compression & perform a vacuum gauge test to check for valve problems.
Related products
Reviews
There are no reviews yet.