Vauxhall Opel CIM unit 93313710 | ML | RESET| Programming avail

Vauxhall Opel CIM unit 93313710 | ML | *RESET* Programming available – BY POST!

  This ECU is Supplied 'Tech2 RESET' (Divorced state) Price includes this unit being supplied 'RESET' & Ready to program with tech2 / Opcom or other suitable equipment *If you do not have necessary programming equipment (Opcom - Tech2) we offer a 'Cloning by post' service - To do this you will need to send us your original component to transfer data & order the additional service listed in our Ebay shop - Please contact us via the Ebay message service for full details*  If you need to replace the ECU / Programmed Control Module  on the your vehicle you will be aware that you cannot simply replace the unit with a second-hand item as they are programmed to the vehicle - The vehicle will not start & run - We supply this ECU 'RESET' meaning the immobiliser function from the above stated ECU type is reset to a 'Virgin - Ready for dealer tool' (Divorced) state enabling the used unit to be programmed by necessary 'Dealer tool' (Tech 2) / Adequate diagnostic tool (Usually Opcom) so it can be installed & work on another vehicle. Removed from running vehicle and dry stored - Good working order Price includes VAT, a UK VAT receipt is supplied with your order for UK sales. For overseas sales we use the Ebay GSP system which calculates your countries VAT, Import fees & delivery charges. Any questions please email or call us anytime

Important! – Please read

If you are purchasing an ECU marked as ‘Tech2 reset’ This means that the immobiliser has been reset to virgin & is NOT 'IMMO OFF' & will start & run as normal providing your immobiliser system & transponder keys are functioning correctly. First locate the part number on your ECU & ensure it matches EXACTLY the part numbers listed on our listing, if the part numbers differ contact us for advice on compatibility, Then click ‘Buy it now’ and pay via Paypal / Card. Before purchasing this service it is essential that you have researched how you will be able to program it to your vehicle & it is advised to consult a competent & experienced auto electrician with good knowledge of using dealer tools or adequate aftermarket tools (For example Tech2 / Opcom for Vauxhall - Peugeot Planet / Lexia for PSA group vehicles)

Terms & Conditions

 Please ensure before ordering an ECU that the fault with your car is an ECU fault and your problem has not been misdiagnosed, if we supply a faulty ECU we are happy to provide a replacement or fully refund you if a replacement is unavailable, however if your existing problem persists with your car then the fault will have been misdiagnosed – if you request a refund on this basis then a 20% restocking fee will be deducted from your refund & return postage will be at purchasers expense.

Advice on ECU Diagnosis & replacement

1 - Scan the vehicle with a diagnostic scanner & record fault codes – rectify any faults recorded here first & check the wiring for faults.

2 - If your ECU has ‘No communication’ with a diagnostic scanner it is essential that you check relevant fuses and consult a wiring diagram for your vehicle and verify the power supply & test the wiring to your ECU – particularly test power supply relays (Engine control relay). – ECU’s returned due to misdiagnosis are subject to a 20% restocking charge.

3 - If you are not a qualified / experienced auto electrician or garage technician and you are unsure if the problem with your car is the ECU then please consult one first before ordering – there is a 20% restocking charge for returns due to misdiagnosis.

4 - If your fault is a cylinder misfire please check spark plugs / leads / coil / injectors and wiring faults / head gasket & valves for faults etc before ordering. There is a 20% restocking charge for returns due to misdiagnosis.

JC Cars / ECU connection UK VAT no. 899712163