Alfa Citroen Fiat Lancia Peugeot ECU Bosch EDC15C7 – Programming Service

Fiat | Alfa | Lancia | Peugeot | Citroen Bosch EDC15C7 ECU Cloning | Virginizing Service

This listing is NOT to supply an ECU module – This is a Cloning / Immobilizer delete / PIN retrieval service!

• The 'Cloning service' option above is if you have a faulty ECU (Electronic Control Unit) / Programmed component on your vehicle, for example it may be water damaged or have a blown component. If you are looking to replace the unit you may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is 'Locked' to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & we will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. Once the donor unit has been programmed (Cloned) the coding of the unit will be correct & the car will start &  function as it should. The mileage display & the central locking etc will be unaffected & operate correctly. We do NOT need the PIN code from your vehicle or the donor part to do this operation *We can clone this type of unit even if there is 'No communication' with diagnostic tools with your unit*.
• The 'Immobilizer delete' option above is to be used when an ECU needs to be set to a 'Free running' or 'Immo off' state. The ECU will then fit onto the vehicle & start and run perfectly without the need of further programming of keys etc - a non transponder key can be used to start the vehicle and this service will cure a faulty immobilizer system.
• The 'PIN code retrieval' option above is to be used when a security PIN code of the unit is unavailable / lost. For example if an auto-locksmith / Auto electrician requires the 'PIN number' to program keys or an ECU to the vehicle.

• The 'Virginizing service only' option is for the virginizing of a secondhand unit ready for installing onto another vehicle & will need to be programmed once installed using diagnostic tools with 'Dealer level' functions'. We are not supplying a unit with this option

• The ‘Data recovery‘ option above is to repair a corrupt Fiat Ducato Immobiliser module – Fitted to various Fiat Ducato | Citroen Relay | Peugeot Boxer models – It is common for the Immobiliser module to get a software corruption – This regularly happens after a flat battery | jump start or from just replacing or disconnecting+reconnecting the car battery. Common fault symptoms are that the car does not start with the keys not being recognised by the vehicle – A diagnostic scan will usually show ‘Immobiliser problem’. We can reprogram (Recover) your original Immo module correcting the software file – We will also need the engine ECU+the keys for the vehicle as these all need to be re-aligned together+new key transponders supplied. The modules will then plug straight back into your car and keys etc will start the vehicle+work correctly. To get your Immobiliser module repaired  all you have to do is simply send us your Immobiliser module, Engine ECU and Key (As in the picture).Example part numbers of Fiat group EDC15C7 ECUs:
  EDC 15C7-2.3:
  0281010332 – 0281010337 – 0281010738 – 0281012093 – 0281011226 – 0281011379 – 0281011396 – 0281011397 – 0281011398 – 0281011399 – 0281011400 – 0281011420 – 0281011421 – 0281011422 – 0281011426 – 0281011487 – 0281011488 – 0281011490 – 0281011496 – 0281011497 – 0281011551 – 0281011553 – 0281011799