BMW FEM – BDC unit / Immobilizer Control Module / Body Control Module | Key supply / Programming Service

BMW ‘F-series’ FEM – BDC unit / Immobilizer Control Module / Body Control Module | Key supply / Programming Service

This listing is NOT to supply a replacement immobilizer module – This is a Cloning / Transponder chip supply service!

• The ‘Cloning service only‘ option above is if you have a faulty Immobilizer ECU Unit / Module on your vehicle, for example it may be water damaged or have a blown component and are looking to replace the unit. You may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is ‘Locked’ to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & will will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. In most cases we can extract the necessary data whether your original unit is completely dead with ‘No communication’ with a diagnostic scanner. Once the donor unit has been programmed (Cloned) your vehicle will then start & run, the mileage display & the central locking etc will be unaffected & operate as it should. IMPORTANT For us to clone a replacement FEM / BDC Module we will need a working key for you car or your engine ECU to be sent with your FEM / BDC Module.
• The ‘Key transponder only‘ option above is for the supply & programming of 1 transponder ‘3 button’ Remote key using the data from your immobilizer to generate the data needed to program the new key ready to start your vehicle. This price is for the first key to be supplied & programmed complete with a cut ‘Emergency blade’ fitted inside the remote. IMPORTANT – for us to be able to do this you must send us your FEM unit+1 working key! – If you have an ‘All Keys Lost’ scenario then choose the ‘All keys lost option’  if you require more than 1 key to be supplied then use the ‘Additional transponder’ for ordering the additional transponder keys.
• The ‘All Keys Lost’ option above is for the supply & programming of a  new key using the data from your ‘FEM unit’ & your engine ECU when all of your car keys are either lost / stolen or no longer working – It is necessary for us to extract the required data from both units to successfully program a working key – IMORTANT For us to be able to do this you must send us both your CAS unit & your Engine ECU!! The price above is for 1 new key to be supplied & programmed with a new metal ‘Emergency’ key blade cut inside the key case. If you require more than 1 key then choose the ‘Additional key’ for more to be supplied.
• The ‘Additional transponder‘ option is for the supply & programming of additional transponder keys only if you have also ordered the ‘Key transponder only’ first transponder key option
• The ‘Cloning From Immo‘ option is for when your Fem / BDC module has been damaged beyond repair & no longer communicates with diagnostic tools – we are able to transfer the immo data from your ECU & key onto the BDC module – this option also requires a new key to be supplied & programmed

**Please note: This service is only for ‘F’ series vehicles & not available for ‘G’ series vehicles**