EU Delivery
UK Delivery
Ford FoMoCo ECU | ESU-411 | Programming Service
This listing is NOT to supply a replacement module – This is a Cloning service!
- If you have a faulty Electronic Control Unit (ECU) / Programmed component on your vehicle, for example it may be water damaged or have a blown component and are looking to replace the unit you may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is 'Locked' to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & will will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. In most cases we can extract the necessary data whether your original unit is completely dead with 'No communication' with a diagnostic scanner. Once the donor unit has been programmed (Cloned) your vehicle will then start & run, the mileage display & the central locking etc will be unaffected & operate as it should.
| Weight | 2 kg |
|---|---|
| Dimensions | 10 × 8 × 4 cm |
| Brand |
Be the first to review “Ford FoMoCo ECU | ESU-411 | Programming Service (Julian Lecigne)”
1 . Scan the vehicle with a diagnostic scanner & record fault codes – rectify any faults recorded here first & check the wiring for faults
2 – If your ECU has ‘No communication’ with a diagnostic scanner it is essential that you check relevant fuses and consult a wiring diagram for your vehicle and verify the power supply & test the wiring to your ECU – particularly test power supply relays (Engine control relay). – ECU’s returned due to misdiagnosis are subject to a 20% restocking charge
If you are not a qualified / experienced auto electrician or garage technician and you are unsure if the problem with your car is the ECU then please consult one first before ordering – there is a 20% restocking charge for returns due to misdiagnosis
If your fault is a cylinder misfire please check spark plugs / leads / coil / injectors and wiring faults / headgasket faults etc before ordering, if these have been checked or replaced then it is important to check inlet manifolds for leaks, engine compression & perform a vacuum gauge test to check for valve problems.
Related products
Ford
Ford Focus 1.6 16v ECU Siemens S118934101F | 4M51-12A650-HF | 9AYF | SIM28 | Plug+Play Exchange unit
Ford
Ford Focus 1.6 ECU Siemens S118934101D | 4M51-12A650-HD | 9AYD | SIM28 | Plug+Play Exchange unit
Ford
VW / Skoda / Ford ECU Bosch 0261206817 | 022906032J | ME7.1 | Plug + Play Immo off ‘Free running’
Ford
Ford Fiesta 1.4 ECU Siemens S118107016A | 4S61-12A650-FA | 5GAA | SIM22 | Plug+Play Exchange unit
Reviews
There are no reviews yet.