EU Delivery
UK Delivery
Vauxhall Opel Astra J Opel Astra ECU ACDelco 55584315 | AA6P | E87 *PLUG & PLAY* (Exchange unit)
Taken from a running vehicle and dry stored. - Good working order
- The 'Unit supplied + cloning service (Exchange unit)' option is for the both the supply of a secondhand unit & the programming service (Cloning - Data transfer from your unit to this donor unit) To do this you will have to send us your old unit. Once we have received your old unit we will transfer the immobilizer data from your old ECU to this supplied unit & return you a replacement unit fully programmed to your vehicle. This unit will then plug straight in and work on your vehicle with your existing keys etc with no further programming necessary. Your vehicle mileage etc will be unaffected by this process & will still display your vehicles correct reading. You will not have to program keys / central locking keyfobs etc after installation. *IMPORTANT* To use this service there must be 'Communication' with your old unit with a diagnostic scan tool.
- The 'Unit supplied only - No service required' option above is for the ECU to be supplied without the programming service included - You will be responsible for the programming yourself - Please only choose this option if you have access to necessary programming equipment & competent in its use.
- The 'Cloning service only' is for a Cloning (Data transfer) service BY POST ONLY – We are NOT supplying the ECU!! If you have a faulty ECU (Electronic Control Unit) on your vehicle, for example it may be water damaged or have a blown component and are looking to replace the ECU you may be aware that you cannot simply remove an ECU from another vehicle & install it onto yours as the ECU is 'Locked' to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) ECU & the donor (Replacement) unit & will will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary - Once the donor unit has been programmed (Cloned) your vehicle will then start & run, the mileage display & the central locking etc will be unaffected & operate as it should. *IMPORTANT* To use this service there must be 'Communication' with your old unit with a diagnostic scan tool. We are not supplying an ECU with this option.
| Weight | 2 kg |
|---|---|
| Type | |
| Manufacturer Part Number | |
| Reference OE/OEM Number | |
| Brand | |
| Car Make | |
| Fuel Type | Diesel |
| Options | Cloning service only (No unit supplied), PIN code retrieval service only (No unit supplied), Unit supplied – With PIN number, Unit supplied + Cloning service (Exchange unit) |
| Other Part Number |
1 . Scan the vehicle with a diagnostic scanner & record fault codes – rectify any faults recorded here first & check the wiring for faults
2 – If your ECU has ‘No communication’ with a diagnostic scanner it is essential that you check relevant fuses and consult a wiring diagram for your vehicle and verify the power supply & test the wiring to your ECU – particularly test power supply relays (Engine control relay). – ECU’s returned due to misdiagnosis are subject to a 20% restocking charge
If you are not a qualified / experienced auto electrician or garage technician and you are unsure if the problem with your car is the ECU then please consult one first before ordering – there is a 20% restocking charge for returns due to misdiagnosis
If your fault is a cylinder misfire please check spark plugs / leads / coil / injectors and wiring faults / headgasket faults etc before ordering, if these have been checked or replaced then it is important to check inlet manifolds for leaks, engine compression & perform a vacuum gauge test to check for valve problems.
Related products
