Audi Seat Skoda Volkswagen VW ECU Siemens PPD1.2 | PPD1.5 | PPD1.3 | Programming Service

VW Audi Seat Skoda PPD1.2 | PPD1.5 | PPD1.3 | ECU Cloning / PIN retrieval service

This listing is NOT to supply an ECU module – This is a Cloning / PIN code retrieval service!

• The ‘Cloning service‘ option above is if you have a faulty ECU (Electronic Control Unit) on your vehicle, for example it may be water damaged or have a blown component. If you are looking to replace the unit you may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is ‘Locked’ to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & we will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. Once the donor unit has been programmed (Cloned) the coding of the unit will be correct & the car will start &  function as it should. The mileage display & the central locking etc will be unaffected & operate correctly. We do NOT need the PIN code from your vehicle or the donor part to do this operation *IMPORTANT* – We can extract the necessary data whether your original unit is completely dead with ‘No communication’ with a diagnostic scanner.
• The ‘Cloning from immo‘ option above should only be selected if you need to program this type of ECU to your vehicle & the original ECU is either lost (Unavailable) or your ECU data is completely irretrievable – Please view the pictures above for information on which modules we can extract the data form to program your donor unit
• The ‘PIN code retrieval‘ option above is to be used when a security PIN code of the unit is unavailable / lost. For example if an auto-locksmith / Auto electrician requires the ‘PIN number’ & ‘Component security’ (C.S.) & MAC codes to program keys or an ECU or instrument to the vehicle. We supply the PIN number, Component security number & MAC code with this service
• The ‘Immobilizer delete‘ option above is to be used when an ECU needs to be set to a ‘Free running’ or ‘Immo off’ state. The ECU will then fit onto the vehicle & start and run perfectly without the need of further programming of keys etc – a non transponder key can be used to start the vehicle and this service will cure a faulty immobilizer system.