Renault Clio | Kangoo Sagem UCH-N2 | UCH-N3 | Programming service BY POST!

Renault Clio | Kangoo Sagem UCH-N2 | UCH-N3 | Programming service BY POST!

This listing is NOT to supply a replacement immobilizer module – This is a Cloning / PIN retrieval / Transponder chip supply service!

• The 'Cloning service only' option above is if you have a faulty Immobilizer ECU Unit / Module on your vehicle, for example it may be water damaged or have a blown component and are looking to replace the unit. You may be aware that you cannot simply remove a unit from another vehicle & install it onto yours as the unit is 'Locked' to a different vehicles electronic / immobilizer system. We have the solution! Simply send us your original (Faulty) unit & the donor (Replacement) unit & will will transfer the data from your original to the replacement enabling the used unit to work on your vehicle with no further programming necessary. In most cases we can extract the necessary data whether your original unit is completely dead with 'No communication' with a diagnostic scanner. Once the donor unit has been programmed (Cloned) your vehicle will then start & run, the mileage display & the central locking etc will be unaffected & operate as it should.
• The 'Key transponder only' option above is for the supply & programming of 1 transponder chip using the data from your immobilizer to generate the data needed to program the transponder to be fitted into a key blade ready to start your vehicle. This price is for the first transponder to be supplied & programmed, if you require more than 1 transponder to be supplied or if you have also ordered the 'Cloning service' for an immobilizer unit then use the 'Additional transponder' for ordering the additional transponders.
• The 'Additional transponder' option is for the supply & programming of additional transponders only if you have also ordered the  'Cloning service' for an immobilizer unit or have ordered the 'Key transponder only' option
• The 'PIN code retrieval' (Security pass details) option above is to be used when programming functions need to be performed such as key programming this will then enable programming functions to be performed.

• The 'Virginizing service only' option is for the virginizing of a secondhand unit ready for installing onto another vehicle & will need to be programmed once installed using diagnostic tools with 'Dealer level' functions'. We are not supplying a unit with this option